In the textile industry, we often use stenter setting machines, so do you know the purpose of using this equipment?The hot air stenter setting machine is mainly composed of several main devices. Each device has a different function. Let's take a look at this aspect above.What are the main structures and functions of the hot air stenter setting machine?First of all, let’s summarize the main structure of the hot air stenter setting machine. Its main devices are: cloth inlet and outlet device, rolling device, hot air circulation system, cooling device, weft straightener device, drying room, overfeeding devices, door width adjustment devices and dehumidification devices, etc.

Before starting the hot air stenter setting machine, the staff forgot to check it to ensure that it can be used stably.Then set the temperature according to the process requirements, and then turn on the circulation fan. During the heating stage, when the speed of the main machine reaches 15m/min and reaches the predetermined temperature, the cloth can be put on.When applying the cloth, it should be noted that both ends should be as flat as possible.When starting the main machine of the stenter setting machine, the bell should be rung to notify the operator at the rear of the car. When the cloth reaches the rear of the car, the cloth should be threaded at a slow speed and the fabric should be tightened. The staff in front should be ready to cooperate. .

Hot air stenter setting machine operating procedures: 1.After driving, check whether the mechanical, electrical, instrumentation and safety protection devices are in good condition.Set the temperature according to the process requirements, then turn on the circulation fan. During the heating stage, the main machine speed is 15m/min. When the set temperature is reached, the fabric can be put on.After meeting the cloth loading requirements, open the active brush wheel, press the cloth on the needle plate, and make both sides as aligned as possible. In addition, put down the passive brush wheel and tighten the fabric.When starting the main machine, the bell should be rung to notify the operator at the rear of the vehicle. When the cloth reaches the rear of the vehicle, the cloth should be put on as quickly as possible and the fabric should be tightened. The operators at the rear of the vehicle should cooperate with each other to call forward and respond.